Autopath Pro - Save 45% until March 31st!

Posted by Jason Bourhill on 1 March 2018 | 0 Comments

Tags: , ,

45 ENGSave 45% on all new licenses of Autopath Pro when you purchase with a 1 year maintenance subscription. This offer is available until March 31st, 2018. Offer applies to standalone and network licenses. Don’t wait to take advantage of the cool features of Autopath PRO!

0 comment(s) | Read the full post

BricsCAD V18.2 Released

Posted by Jason Bourhill on 20 February 2018 | 0 Comments

Tags: , ,

BricsCADV18 2 GoodnessBricsCAD V18.2 has been released, and it is packed with new features and improvements. Did we mention this is a mid cycle release? That's right, these are in addition to the original V18 release from last October. While other CAD applications are stagnating, BricsCAD keeps on trucking forward.

0 comment(s) | Read the full post

BricsCAD Roadshow 2018

Posted by Jason Bourhill on 9 February 2018 | 0 Comments

Tags: , , ,

BricsCADRoadshow 01CAD Concepts & Sofoco are proud to announce the BricsCAD Roadshow, which is running this April in New Zealand & Australia. This is a must attend event for CAD leaders and decision makers. See the BricsCAD Roadshow page for more details, and to book your place.

0 comment(s) | Read the full post

CSD Siteworks Seminar - Christchurch

Posted by Jason Bourhill on 25 May 2017 | 0 Comments

Tags: , ,

Are you a Surveyor looking to be able to do more than just topographical survey, or involved with Civil construction and want to be able to easily set out and generate reports on your projects?

0 comment(s) | Read the full post

Civil Site Design Seminar - Christchurch

Posted by Jason Bourhill on 25 May 2017 | 0 Comments

Tags: , ,

Civil Site Design turns your CAD application into the total Civil Design tool. This comprehensive civil design solution incorporates road design, drainage, sewer and pipe design, surfaces, alignments and site grading. All of this without needing to leave the BricsCAD (or AutoCAD, Civil3d, Map) interface.

0 comment(s) | Read the full post

BricsCAD puts a Clip in your step

Posted by Jason Bourhill on 21 April 2016 | 0 Comments

Tags: , , , ,

BricsCAD 16.2 includes an exciting new feature called Clip Display. Quite simply it’s going to change how you work in 3D. - See more on Bricsys.TV

0 comment(s) | Read the full post

BricsCAD Sample CADLibrary Updated

Posted by Jason Bourhill on 17 February 2016 | 0 Comments

Tags: , , ,

We've updated our BricsCAD sample CAD Library for BricsCAD V16.

0 comment(s) | Read the full post

PrintPrevious

Posted by Jason Bourhill on 17 February 2016 | 0 Comments

Tags: , , ,

Ever just wanted a drawing using your last print settings without having to go through the setup process? PrintPrevious was created just for this. It will automatically print your current layout with your previous print settings. If no previous settings exist, then the command will cancel and display an error message to this effect.

0 comment(s) | Read the full post

COPY or MOVE relative to DUCS

Posted by Jason Bourhill on 7 February 2016 | 1 Comments

Tags: , , , ,

When working in 3D it can often be easier to create new objects on the WCS, then manipulate them into position afterwards. Of course this still requires a bit of work to position and align your new object to existing ones in your model. However by using some LISP and levering of the properties of the INSERT command you can make this rather effortless.

1 comment(s) | Read the full post

Buy BricsCAD V15, Get V16 Free!!

Posted by Jason Bourhill on 19 September 2015 | 0 Comments

Tags: , ,

BricsCAD V16 is coming soon!! From Sept 20 all new* orders for BricsCAD will automatically receive a BricsCAD V16 license key for free. BricsCAD V16 is expected to be released sometime next month following the Bricsys Conference.

0 comment(s) | Read the full post