Viewing entries tagged with 'v13'

BricsCAD V13 (Platinum) - Assembly Modeling

Posted by Jason Bourhill on 17 January 2013 | 0 Comments

Tags: , , , ,

Bricsys have posted a video demonstration of BricsCAD V13 Platinums Assembly Modeling capabilities. The example shows how to attach parts or sub assemblies (all of which are dwg files), editing sub assemblies, adding a bill of materials, and making use of the x-solids hardware library.

0 comment(s) | Read the full post

BricsCAD V13 (Platinum) - Kinematic Analysis

Posted by Jason Bourhill on 14 December 2012 | 0 Comments

Tags: , , , ,

Bricsys have posted a video demonstration of the new mechanical features included with BricsCAD Platinum. The model used is the same as presented at the recent conference in October.

0 comment(s) | Read the full post

BricsCAD V13 - Sample Mechanical Files

Posted by Jason Bourhill on 13 November 2012 | 0 Comments

Tags: , , ,

Looking to play with some of the BricsCAD Platinums new mechanical modelling features introduced with V13? If you take a look in your installation folder you will find a couple of models have been provided as samples. You should find them located under:

0 comment(s) | Read the full post

BricsCAD V13 - Click n Drag

Posted by Jason Bourhill on 12 November 2012 | 0 Comments

Tags: , , , , ,

A rather subtle feature introduced with BricsCAD V13 is the ability to click and drag on objects to move and copy them. Its subtle in that it provides no prompting, or graphicical indication when you use it. In fact move has been available since V11, with the copy feature added with V13.

0 comment(s) | Read the full post

BricsCAD V13 - Dynamic UCS

Posted by Jason Bourhill on 5 November 2012 | 0 Comments

Tags: , , , ,

A new feature introduced with BricsCAD V13 is Dynamic UCS. This subtle feature will prove to be a major time saver for those working in 3D, as demonstrated in the video below. This video also shows Automatic Command Completion in action, which is another new feature with V13.

0 comment(s) | Read the full post

BricsCAD V13 (Platinum) - Inverse Kinematics

Posted by Jason Bourhill on 25 October 2012 | 0 Comments

Tags: , , , ,

Demonstration of Inverse Kinematics in action with BricsCAD V13 Platinum at the 2012 Bricsys conference in Amsterdam on October 3rd. Presentation was made by Dmitry Ushakov, Chief Executive Officer, Bricsys Technologies Russia. With BricsCAD V13 Platinum is moving further to identify itself as the MCAD option of the three different types of BricsCAD.

0 comment(s) | Read the full post

The Unofficial Bricscad Wishlist - Results

Posted by Jason Bourhill on 26 September 2012 | 0 Comments

Tags: , , ,

Well the Unofficial Bricscad Wishlist poll has closed and the results are in. The top three wishes are listed below. Head over to the Bricscad forum for further results and discussion.

0 comment(s) | Read the full post

Bricscad V13, It's not far away

Posted by Jason Bourhill on 3 September 2012 | 0 Comments

Tags: ,

Bricsys have just anounced that from today, September 3 2012, all NEW full license keys - all languages and all platforms - are enabled for Bricscad V13. Please note that this does not apply for people upgrading from an earlier version.

0 comment(s) | Read the full post