Viewing entries tagged with 'bricscad'

BricsCAD V18.2 Released

Posted by Jason Bourhill on 20 February 2018 | 0 Comments

Tags: , ,

BricsCADV18 2 GoodnessBricsCAD V18.2 has been released, and it is packed with new features and improvements. Did we mention this is a mid cycle release? That's right, these are in addition to the original V18 release from last October. While other CAD applications are stagnating, BricsCAD keeps on trucking forward.

0 comment(s) | Read the full post

BricsCAD Roadshow 2018

Posted by Jason Bourhill on 9 February 2018 | 0 Comments

Tags: , , ,

BricsCADRoadshow 01CAD Concepts & Sofoco are proud to announce the BricsCAD Roadshow, which is running this April in New Zealand & Australia. This is a must attend event for CAD leaders and decision makers. See the BricsCAD Roadshow page for more details, and to book your place.

0 comment(s) | Read the full post

BricsCAD Sample CADLibrary Updated

Posted by Jason Bourhill on 17 February 2016 | 0 Comments

Tags: , , ,

We've updated our BricsCAD sample CAD Library for BricsCAD V16.

0 comment(s) | Read the full post

Buy BricsCAD V15, Get V16 Free!!

Posted by Jason Bourhill on 19 September 2015 | 0 Comments

Tags: , ,

BricsCAD V16 is coming soon!! From Sept 20 all new* orders for BricsCAD will automatically receive a BricsCAD V16 license key for free. BricsCAD V16 is expected to be released sometime next month following the Bricsys Conference.

0 comment(s) | Read the full post

BricsCAD Platinum does Sheetmetal

Posted by Jason Bourhill on 24 August 2015 | 0 Comments

Tags: , ,

BricsCAD Platinum has matured to become quite a useful tool for working with sheetmetal. Bricsys.TV has recently added a four part video series prepared by Damian Harking of Sofoco where he demonstrates using sheetmetal to create a workbench for a commercial kitchen. He also includes the source files to allow you to try it out for yourself.

0 comment(s) | Read the full post

Using BricsCAD with Nearmap

Posted by Jason Bourhill on 9 August 2015 | 1 Comments

Tags: , , ,

Nearmap MapconnectIf you are using the Professional, or Platinum version of BricsCAD V15.3 or later, then you may like to know that you can integrate aerial imagery from Web Map Service (WMS) providers on your drawing, through the use of the new MAPCONNECT command.

1 comment(s) | Read the full post

The BricsCAD BIM debate

Posted by Jason Bourhill on 3 August 2015 | 0 Comments

Tags: , ,

BIM Forum

0 comment(s) | Read the full post

BricsCAD V15 Linux is here

Posted by Jason Bourhill on 25 February 2015 | 0 Comments

Tags: , ,

BricsCAD works on Windows, Mac, and Linux

0 comment(s) | Read the full post

BricsCAD V15 Promotion

Posted by Jason Bourhill on 30 November 2014 | 0 Comments

Tags: , ,

BricsCAD V15 is here

0 comment(s) | Read the full post

BricsCAD for the MAC has arrived

Posted by Jason Bourhill on 20 November 2014 | 0 Comments

Tags: , , ,

BricsCAD for the MAC has arrived! BricsCAD V15 licenses are also cross platform compatible, meaning you choose to run BricsCAD on Windows, Linux, or MAC using the same license. What's more the feature set is more or less identical across all three.

0 comment(s) | Read the full post